Conversor convertidor USB Serial TTL
FT232RL Modulo adaptador USB a Serial TTL. Disponible sin cable USB ó con cable USB.
Este módulo es una herramienta muy útil que permite conectar una computadora con cualquier dispositivo serial TTL a través del puerto USB. Compatible con Windows CE, 98, ME, 2000, XP, Server 2003, Vista, Server 2008, 7, 8, 8.1, 10, Linux, Mac OS
Con el desarrollo de la tecnología informática, los puertos paralelo y serie de su PC han desaparecido poco a poco, y es muy raro encontrar alguno de ellos en un computador moderno actualmente. Pero para los Ingenieros, las interfaces paralela y serie son esenciales, especialmente el puerto serie. Para un computador sin puerto serial, la solución más conveniente es utilizar un chip conversor de USB a puerto serie virtual, y muchos fabricantes se han dedicado a producir tales chips, por ejemplo: CP210x, TUSB3410, CH34x, FT232, PL230x y ARK3116. Desde el punto de vista de estabilidad, confiabilidad y soporte, una de las mejores opciones es el chip FT232RL de FTDI, y es el que se emplea en este adaptador.
Este módulo es una herramienta muy útil que permite conectar una computadora con cualquier dispositivo serial TTL a través del puerto USB. Se puede emplear para la programación del Arduino Pro Mini. Cuando conecte el conversor al puerto USB, el computador lo reconocerá como un Puerto Virtual COM (VCP) que permitirá realizar la comunicación serial a niveles TTL con los dispositivos externos.
Caracteristicas y Especificaciones
Chip: FT232RL
Sistemas operativos compatibles: Windows CE, 98, ME, 2000, XP, Server 2003, Vista, Server 2008, 7, 8, 8.1, 10, Linux, Mac OS
Alimentacion del módulo: 5V del puerto USB
Consumo de corriente: 15mA
Señales seriales (a niveles TTL): TX, RX, RTS/, CTS/, DTR/, DSR/, DCD/, RI/
Pin de alimentación de salida VCC: 5V ó 3.3V (se selecciona por medio de un jumper en el modulo)
Conector: Mini USB
Tamaño: 17x33mm
Contenido
1x Modulo adaptador convertidor conversor USB a Serial TTL
1x Cable Mini USB (opcional)
Descargas
Información complementaria (en Inglés)
The USB to TTL serial adapter is based on the high quality and very popular FTDI FT232RL chipset and is an excellent way to connect TTL serial devices to a PC through a USB port. This USB to TTL serial adapter is ideal for many uses, including:
- Programming microprocessors such as ARM, AVR, etc
- Working with computing hardware such as routers and switches
- Serial communication with many devices such as GPS devices
- Serial terminals on devices like the Raspberry Pi
Unlike most USB to TTL serial adapters, this adapter supports both 5V AND 3.3V operation! Simply set the jumper as required to choose between 5V and 3.3V as labelled on the board.
The adapter comes with a right-angle connector fitted allowing you to use it straight away. If you need to access any of the other inputs or outputs of the FT232RL, all the useful signals are provided as through-hole solder pads - ideal for use with straight headers into a breadboard, for example.
The main connector has 6 pins:
- DTR: Data Terminal Ready - an output used for flow control
- RX: Serial data Receive pin
- TX: Serial data Transmit pin
- VCC: Positive voltage output - this is controlled by the jumper. If the jumper is set to 5V, this will provide a 5V output. If the jumper is set to 3.3V, this will provide a 3.3V output.
- CTS: Clear To Send - an input used for flow control
- GND: Ground or 0V
For most uses, you can simply connect the following pins:
- RX on this board to the TX pin on your device
- TX on this board to the RX pin on your device
- GND on this board to GND on your device
The VCC pin is ideal for powering small devices such as homemade circuits. This pin should not be connected when a device has a separate power supply as this may damage both devices.
Please note that in 5V mode the maximum current draw on this pin is approximately 500mA. In 3.3V mode the maximum current draw on VCC is approximately 50mA.
Productos relacionados
6 productos más en la misma categoría:
Los clientes que adquirieron este producto también compraron:
Modulo WiFi ESP8266 NodeMCU
A partir de | Precio unitario |
---|---|
5 | $ 5,59+IVA ($ 6,43) |
Pro Mini para Arduino®
A partir de | Precio unitario |
---|---|
5 | $ 5,11+IVA ($ 5,88) |
Rele Relay 12v 10A 1contacto
A partir de | Precio unitario |
---|---|
10 | $ 0,61+IVA ($ 0,70) |
Modulo de 1 matriz LED con MAX7219
A partir de | Precio unitario |
---|---|
5 | $ 3,09+IVA ($ 3,55) |